This training is an introduction to continuous modeling with FLAC2D and FLAC3D. At the end of the course, participants will master the graphical interface, documentation and the main modeling steps. Concepts are illustrated using a tunnel excavation example, from building the model geometry to results analysis. This introductory course provides the foundation for more advanced use of the software, which can be covered in more specific training modules.
This webinar demonstrated setting-up a hydraulic fracturing model in XSite and reviewed the simulation results. The model consisted of two boreholes, each with two stages, in a fractured rock mass. Each stage consisted of four perforation clusters.
A background on XSite and its methodology and a comparison between simulation results for several cases (varying fracture properties and a base case with no pre-existing fractures) was also presented.
XSite is a powerful three-dimensional hydraulic fracturing numerical simulation program based on the Synthetic Rock Mass (SRM) and Lattice methods.
This webinar was held on Thursday | November 12, 2020 at 10 am (CST).
LEARN MORE about XSite
2020年11月12日
Language: